slide block
英 [slaɪd blɒk]
美 [slaɪd blɑːk]
网络 滑块; 滑闩式; 滑动块
双语例句
- Slide block universal radial drilling machine
滑座式万向摇臂钻床 - Then a level side slide block is designed, it can make the forming part able to automatically stripping.
然后两个凹模滑块侧向水平向内形成两侧半圆形形状，并能使冲压件进行自动脱料。 - The toothed slide block is provided with an arc-shaped groove.
带齿滑块上制有弧线形槽。 - Slide block universal radial drilling machine pulley-block luffing gear
滑座式万向摇臂钻床（起重机）升降支臂用滑轮组 - The inner part of the base is provided with a slide block, and the slide block is elastically arranged in a spacing slide rail which is arranged on the plate of the base.
底座夹层内设有滑块、底座的底板上设有限位滑轨、滑块弹性支承于滑轨内； - Modeling and optimization of double crank slide block steering mechanism
双曲柄滑块式转向机构的建模及优化研究 - When the utility model drives the upper punch die by the slide block to proceed with the working, the lower punch power is bigger.
本实用新型经滑块带动上冲模进行工作时，下冲力较大。 - Development of injection mould with angled slide block for sequential core-pulling and delayed ejection;
模具结构中采用了定模强制脱模，顺序开模，滑动型芯延时顶出等机构。 - This model is engaged with integrated hydraulic system, which illustrates robust performance. Stiffness Calculation for Linear Rolling Guide with Elastic Deformation of Slide Block Taken into Account
◆采用三点支承滚动导轨，消除支承间隙，提高剪切质量。直线滚动导轨考虑滑块体弹性变形时的刚度计算 - The utility model provides with a pair of elastic clamps, a pair of slide block hooks and a hook locating mechanism on the upper opening point of a holder.
它是在一支架的上口处安装一对弹性夹和一对滑架式挂钩以及挂钩定位机构。 - The circumference of a seeding wheel is provided with an axial groove, and the inner part of the axial groove is provided with a slide block whose axial position can be adjusted.
播种轮的圆周上设有轴向槽，轴向槽里装有可调整其轴向位置的滑动块； - The utility model relates to a slide block for a rolling rotor compressor, which belongs to the technical field of a slide block for a rolling rotor compressor.
本实用新型滚动转子压缩机的滑块属于滚动转子压缩机的滑块技术领域。 - Motion Simulation System for Crank and Slide Block Based on Eclipse RCP
基于eclipseRCP的曲柄滑块机构运动仿真系统研究 - When the slide block is positioned at the other end, the quantitative hole and the discharge hole are superposed, and the slide block closes the feeding hole.
而滑块处在另一端时其定量孔洞与出料孔重叠，同时移动后的滑块封闭送料孔。 - Crankshaft, piston, plunger piston, guider, guide rail, rotary drum, slide block, and various abrasive wear surface.
曲轴、活塞、柱塞、导柱、导轨、滚筒、滑块、各种摩擦表面、机械主轴等。 - The FEM software ( ANSYS) is adopted for the strength analysis of slide block universal spindle.
滑块式万向接轴因其能在倾角较大情况下传递较大的扭矩而被广泛应用。 - Stiffness Calculation for Linear Rolling Guide with Elastic Deformation of Slide Block Taken into Account
直线滚动导轨考虑滑块体弹性变形时的刚度计算 - As sleeve mounted on the sliding rail, the tool apron can locate steady end wise by the sliding rail, further the tool apron can freewheel around the sliding rail on the slide block to change blade.
刀座是套在滑轨上的，因此在纵向可以靠滑轨得到稳定的定位，刀座可以在滑块上绕滑轨单向转动，以实现换刀的目的。 - Using metallographic method, the wear of the coupling copper slide block of hot strip mill qualitatively studied.
采用金相分析方法，对热轧机万向接轴内铜滑块的磨损现象进行了定量分析。 - The support seat is also arranged on the slide block.
所述滑块上也设有支座； - The band drawing mechanism is composed of a band clamping slide block and a band drawing feed screw connected with a loose pin at one end of the slide block.
抽带机构由一个夹带滑块和与滑块一端活销接的抽带丝杠组成。 - Automation production was achieved by applying ball bearing, tapered wedge and slide block mechanism to pull off the fixed mould plate and gating plate, and control the pull off distance.
利用滚珠、斜楔、滑块机构拉开定模板和浇口板并控制其拉开距离，从而达到自动生产目的。 - This paper introduces a simple graphic method for designing the planar crank slide block mechanism with urgent returning specific property and gives theoretical proof.
介绍了设计有急回特性的平面曲柄滑块机构的简易图解法，并给出了理论证明。 - In order to prevent the slide block of cardan shaft from wearing seriously, the cardan shaft in the skew rolling mill must be rational designed.
为了避免由于万向联接轴的滑块严重磨损造成斜轧机传动系统的冲击和噪音等问题，必须合理地设计斜轧机的万向联接轴。 - The matrix of this die is made up by fixed parts and movable parts, floating matrix insert and slide block are controlled and localized by bidirectional wedge and sleeve ring, it ensures the pressing material precision along horizontal and vertical direction, satisfies the parts quality requirements.
该模具的凹模由固定部分和活动部分组成，浮动凹模镶块和滑块部分由双向斜楔控制、套环定位，保证了横向和纵向压料的精度，满足了零件质量要求。 - Based on the principle of the spatial inversion, this paper proposes a new method of determining the stroke of the slide block of the spatial slider-crank mechanism by way of descriptive geometry.
本文根据空间反演变换的原理，运用画法几何的方法，对空间曲柄滑块机构滑块行程的确定，提出了一种新的图解法。 - A new Method for Dynamic Analysis of Flying Shear with Consideration of Friction in the Slide Block
考虑滑道摩擦时飞剪机动力学分析的一种新方法 - A new method is presented for dynamic analysis of flying shear with consideration of friction in the slide block.
提出了一种新的方法解决了考虑滑道摩擦情况下飞剪机构的动力学分析问题。 - In this chapter, we carry on a design of crank and slide block mechanisms which meets the requirements for both the maximum of the minimum transmission angle and the minimum dimension by adjusting the length of crank connecting rod and eccentric distance.
通过调节曲柄长度、连杆长度和偏心距，对曲柄滑块机构进行了三维双目标优化设计。该设计既满足最小传动角最大的要求，同时又使其尺寸最小。 - Explicit finite element contact model of the telescopic boom and the slide block have been established in LS-DYNA.
在LS-DYNA中建立了伸缩臂与下滑块的显式有限元接触模型。